Handbook of Process Integration (PI)
Minimisation of Energy and Water Use, Waste and Emissions
- 2nd Edition - November 9, 2022
- Latest edition
- Editor: Jiří Jaromír Klemeš
- Language: English
Handbook of Process Integration (PI): Minimisation of Energy and Water Use, Waste and Emissions, Second Edition provides an up-to-date guide on the latest PI research and applicati… Read more
World Book Day celebration
Where learning shapes lives
Up to 25% off trusted resources that support research, study, and discovery.
Description
Description
Handbook of Process Integration (PI): Minimisation of Energy and Water Use, Waste and Emissions, Second Edition provides an up-to-date guide on the latest PI research and applications. Since the first edition published, methodologies and sustainability targets have developed considerably. Each chapter has been fully updated, with six new chapters added in this release, covering emissions, transport, water scarcity, reliability and maintenance, environmental impact and circular economy. This version also now includes worked examples and simulations to deepen the reader’s understanding.
With its distinguished editor and international team of expert contributors, this book is an important reference work for managers and researchers in all energy and sustainability industries, as well as academics and students in Energy, Chemical, Process, and Environmental Engineering.
Key features
Key features
- Provides a fully updated handbook with six new chapters that reflect the latest research and applications on process integration
- Reviews a wide range of process design and integration topics, ranging from heat and utility systems to water, recycling, waste and hydrogen systems
- Covers equipment design and operability issues, with a strong extension to environmental engineering and suitability issues
Readership
Readership
Table of contents
Table of contents
Part I: Overview of Process Integration and Analysis
Chapter 1: Process Integration (PI): An Introduction
Abstract:
1.1 Introduction
1.2 A Short History of Process Integration (PI)
1.3 Current Centres of Expertise in PI
1.4 Sources of Further Information
Chapter 2: Basic Process Integration Terminology
Abstract:
2.1 Introduction
2.2 Process Integration Terms: The Importance of Context
2.3 Fundamental Process Integration Terms
2.4 Conventions: Symbols for Heaters and Coolers
2.6 Appendix: Nomenclature
Chapter 3: Process Design, Integration and Optimisation: Advantages, Challenges and Drivers
Abstract:
3.1 Introduction
3.2 Grassroots Design versus Retrofit Design
3.3 Process Integration
3.4 Integration versus Intensification
3.5 Process Integration Techniques
3.6 Optimisation of Integrated Processes
3.7 Controllability of Integrated Processes
3.8 Process Integration under Disturbances
Part II: Heat Integration
Chapter 4: Heat Integration: Targets and Heat Exchanger Network Design
Abstract:
4.1 Introduction
4.2 Stages in the Design of Heat Recovery Systems
4.3 Data Extraction
4.4 Performance Targets
4.5 Process Modifications
4.6 Network Design
4.7 Design Evolution
4.8 Conclusion
4.9 Sources of Further Information
Chapter 5: Application of Process Integration to the Synthesis of Heat and Power Utility Systems Including Combined Heat and Power (CHP) and Industrial Heat Pumps
Abstract:
5.1 Introduction
5.2 Targeting Utility Loads and Temperature Levels
5.3 Integration of Advanced Energy Conversion Cycles as Process Utilities: Basic Concepts
5.4 Process Integration of Heat Engines
5.5 Process Integration of Heat Pumps
5.6 Sources of Further Information and Advice
Chapter 6: Total Site Methodology
Abstract:
6.1 Introduction
6.2 Data Extraction for Total Sites
6.3 Total Site Profiles and Total Site Composite Curves
6.4 Site Utility Grand Composite Curve (SUGCC)
6.5 Conclusion
6.6 Sources of Further Information
Chapter 7: Extending Total Site Methodology to Address Varying Energy Supply and Demand
Abstract:
7.1 Introduction
7.2 Characteristics of Energy Supply and Demand
7.3 Thermal Energy Storage and Integrated Architecture
7.4 Terminology for Process Streams and Utilities
7.5 Identification of Time Slices
7.6 Heat Cascades for the Evaluation of Total Site Targets When There Is Variation in Supply and Demand
7.7 Case Study: Integration of Solar Thermal Energy into a Locally Integrated Energy Sector (LIES)
7.8 Conclusion
7.9 Sources of Further Information
7.11 Appendix: Nomenclature
Chapter 8: Analysis and Design of Heat Recovery Systems for Grassroots and Retrofit Situations
Abstract:
8.1 Introduction
8.2 Extended Procedures for Grassroots Analysis
8.3 Extended Procedures for Grassroots Design
8.4 Retrofit Analysis and Design
8.5 Use of Optimisation for Heat Exchanger Network Synthesis
8.6 Conclusion
8.7 Sources of Further Information
Chapter 9: Heat Integration in Batch Processes
Abstract:
9.1 Introduction
9.2 Graphical Technique for Heat Integration in Batch Process
9.3 Mathematical Technique for Heat Integration of Batch Plants
9.4 Case Study of a Multipurpose Batch Facility
9.5 Industrial Case Study
9.6 Conclusion
9.7 Sources of Further Information
9.9 Appendix: Glover Transformation (Glover, 1975)
Part III: Mass Integration
Chapter 10: Water Pinch Analysis for Water Management and Minimisation: An Introduction
Abstract:
10.1 Approaches for Water Management and Minimisation
10.2 Water Integration and Water Pinch Analysis
10.3 Water Pinch Analysis Steps
10.4 Examples of Successful Case Studies
10.7 Appendix: Nomenclature
Chapter 11: Using Systematic Design Methods to Minimise Water Use in Process Industries
Abstract:
11.1 Introduction
11.2 Water Use in Process Industries
11.3 Process Integration for Water Systems
11.4 Conclusions and Future Trends
11.5 Sources of Further Information
Chapter 12: Synthesis of Water Networks with Water Loss and Gain via an Extended Pinch Analysis Technique
Abstract:
12.1 Introduction
12.2 Targeting a Single Water-Using Process
12.3 Process-based Graphical Approach (PGA) for Synthesis of Direct Reuse Water Networks
12.4 Conclusion
12.5 Sources of Further Information and Advice
12.6 Acknowledgements
12.8 Appendix: Nomenclature
Chapter 13: Conserving Material Resources through Process Integration: Material Conservation Networks
Abstract:
13.1 Introduction
13.2 Overall Targeting of Material Conservation Networks
13.3 Mass Exchange Networks
13.4 Water-Pinch Analysis
13.5 Direct Recycle and Material Recycle Pinch Diagram
13.6 Property-Based Material Recycle Pinch Diagram
13.8 Appendix: Nomenclature
Part IV: Extended Process Integration
Chapter 14: Process Integration for Cleaner Process Design
Abstract:
14.1 Introduction
14.2 A Revised ‘Onion Diagram’
14.3 Different Models for Total Material Network (TMN)
14.4 Case Study: Water Minimisation in a Water Fabrication Plant
14.5 Conclusion
14.6 Sources of Further Information
14.8 Appendix: Nomenclature
Chapter 15: Process Integration Concepts for Combined Energy and Water Integration
Abstract:
15.1 Introduction
15.2 Water–Energy Specifics and Challenges
15.3 Water Path Concept
15.4 State-of-the-Art Methodology for Combined Energy and Water Integration
15.5 Sequential, Simultaneous, Mathematical Programming
15.6 Conclusion
15.7 Sources of Further Information
Chapter 16: Process Integration Techniques for Cogeneration and Trigeneration Systems
Abstract:
16.1 Introduction
16.2 Combined Heat and Power
16.3 Heat Integration of Trigeneration Systems
16.4 Conclusions
16.5 Sources of Further Information
16.7 Appendix: Nomenclature
Chapter 17: Pinch Analysis for Sustainable Energy Planning Using Diverse Quality Measures
Abstract:
17.1 Introduction
17.2 Generalised Problem Statement
17.3 Graphical Targeting Procedure
17.4 Case Studies
17.5 Conclusion
17.6 Sources of Further Information
17.8 Appendix
Chapter 18: A Unified Targeting Algorithm for Diverse Process Integration Problems
Abstract:
18.1 Introduction to Targeting Algorithms
18.2 Unified Approach to Diverse Resource Optimisation Problems
18.3 Basis for Unification
18.4 Unified Targeting Algorithm (UTA)
18.5 Heat Exchange Networks (HENs) and Mass Exchange Networks (MENs)
18.6 Water Networks: Case Study of a Specialty Chemical Plant
18.7 Hydrogen and Other Gas Networks
18.8 Property-Based Material Reuse Networks
18.9 Alternative Approaches to Targeting
18.10 Conclusion
18.11 Sources of Further Information
18.13 Appendix: Nomenclature
Chapter 19: A Process Integration Approach for Supply Chain Development
Abstract:
19.1 Introduction
19.2 Supply Chain Characteristics and Performance Measurement
19.3 Supply Chain Development with Process Integration
19.4 Case Studies
19.5 Future Trends
19.6 Sources of Further Information
Chapter 20: Application of Heat Recovery Loops to Semi-continuous Processes for Process Integration
Abstract:
20.1 Introduction
20.2 Indirect Heat Recovery Systems
20.3 Application of Heat Recovery Loops to Semi-continuous Plants
20.4 A More Complex Example of a Heat Recovery Loop (HRL)
20.5 Case Study: Semi-continuous Multi-plant Dairy Factory
20.6 Conclusions and Future Trends
20.7 Sources of Further Information
Part V: Applications and Case Studies
Chapter 21: Applications of Energy and Water Process Integration Methodologies in Oil Refineries and Petrochemical Complexes
Abstract:
21.1 Introduction
21.2 Heat and Power Integration
21.3 Water and Wastewater Minimisation
Results and Discussion
Results and Discussion
21.4 Effluent Treatment and Regeneration
Results and Discussion
Results and Discussion
21.5 Conclusion
Chapter 22: Process Integration of an Oil Refinery Hydrogen Network
Abstract:
22.1 Introduction
22.2 Technology Review
22.3 An Industrial Case Study
22.4 Hydrogen Management in the Wider Context of Process Integration: Future Trends
22.5 Conclusion
22.6 Sources of Further Information
Chapter 23: Retrofit Mass Integration of Acid Gas Removal Systems in Petrochemical Plants
Abstract:
23.1 Introduction
23.2 Review of Previous Work on Mass Exchanger Network Synthesis (MENS) and Retrofit of Existing Systems
23.3 Systems Studied: Venturi Scrubber System and Ethanolamine Absorber System
23.4 Pinch Approach
23.5 Hybrid Approach
23.6 Solution Equilibria
23.7 Results and Discussion
23.8 Conclusions and Sources of Further Information
Chapter 24: Applications of Pinch Technology to Total Sites: A Heavy Chemical Industrial Complex and a Steel Plant
Abstract:
24.1 Introduction
24.2 Case Study of a Heavy Chemical Complex
24.3 Case Study of a Steel Plant
24.4 Conclusion
24.5 Sources of Further Information
24.6 Acknowledgements
Chapter 25: Applications of Process Integration Methodologies in the Pulp and Paper Industry
Abstract:
25.1 Introduction
25.2 Energy Demands and Sources in the Kraft Pulping Process
25.3 Relations between the Heat Exchanger and Water Networks
25.4 Increasing Energy Efficiency in Existing Mills
25.5 Methodological Developments for Heat Integration in Existing Mills
25.6 Evolution of Pulp and Paper Mills
25.7 Conclusion
25.8 Sources of Further Information
Chapter 26: Application of Process Integration Methodologies to the Thermal Processing of Waste
Abstract:
26.1 Introduction
26.2 Types of Waste Thermal Processing Plants
26.3 Analysis of Energy Efficiency in the TERMIZO Plant
26.4 Application of Heat Integration Technology
26.5 Conclusion
26.6 Sources of Further Information and Advice
Chapter 27: Application of Process Integration Methodologies in the Brewing Industry
Abstract:
27.1 Introduction
27.2 Process Flowsheet Analysis
27.3 Calculating Maximum Heat Recovery in the System
27.4 Defining the Energy Conversion System
27.5 Conclusion
27.6 Sources of Further Information
27.8 Appendix A: Complementary Tables
27.9 Appendix B: Nomenclature
Chapter 28: Applications of Process Integration Methodologies in Dairy and Cheese Production
Abstract:
28.1 Introduction
28.2 Application of Process Integration Methodologies
28.3 Selected Case Studies
28.4 Future Trends
28.5 Sources of Further Information
Chapter 29: Applications of Process Integration Methodologies in Beet Sugar Plants
Abstract:
29.1 Introduction
29.2 Sugar Production from Sugar Beet
29.3 Identification of Opportunities to Improve Energy and Water Use in Sugar Plants
29.4 Reduction of Energy Consumption
29.5 Reduction of Water Consumption
29.6 Energy and Water Use in Sugar Production Directly from Raw Beet Juice
29.7 Future Trends
29.8 Sources of Further Information and Advice
Chapter 30: Application of Process Integration Techniques for the Efficient Use of Energy in a Urea Fertiliser Plant: A Case Study
Abstract:
30.1 Introduction
30.2 Process Description
30.3 Opportunities for the Reduction of Energy Consumption
30.4 Conclusion
30.5 Sources of Further Information
30.7 Appendix: Nomenclature
Chapter 31: Process Integration for Energy Saving in Buildings and Building Complexes
Abstract:
31.1 Introduction
31.2 Buildings as Consumers and Producers of Energy
31.3 Commercial and Public Buildings and Building Complexes
31.4 District Energy (DE) Systems and Total Site Analysis (TSA)
31.5 The Use of Industrial Waste Heat
31.6 Renewable Energy for Buildings
31.7 Conclusion
31.8 Sources of Further Information and Advice
Chapter 32: Heat Transfer Enhancement in Heat Exchanger Networks
Abstract:
32.1 Introduction to Shell-and-Tube Heat Exchangers
32.2 Heat Transfer Enhancement Techniques
32.3 Heat Transfer Enhancement in Heat Exchanger Network Retrofit
32.4 Heat Transfer Enhancement in Heat Exchanger Network Retrofit with Fouling Consideration
32.5 Sources of Further Information
32.6 Nomenclature
Chapter 33: Applications of Pinch Analysis in the Design of Isolated Energy Systems
Abstract:
33.1 Introduction
33.2 Isolated Energy Systems: Descriptions and Models
33.3 Grand Composite Curve and Storage Sizing
33.4 Design Space
33.5 Illustrative Applications
33.6 Sources of Further Information and Advice
Part VI: Software Tools and Epilogue
Chapter 34: Software Tools for Heat Integration
Abstract:
34.1 Heat Integration Software Tools
34.2 Sources of Further Information and Advice
Chapter 35: Mass and Water Integration Software Tools
Abstract:
35.1 Mass and Water Integration Software Tools
35.2 Sources of Further Information and Advice
Chapter 36: Epilogue: The Importance of Problem Formulation and Data Extraction in Process Integration
Abstract:
36.1 Introduction: Process Integration – from its Roots to its Present Strong Position
36.2 Successful Applications of Process Integration
36.3 Methods of Obtaining Credible High Integration HI Solutions
36.4 Data Extraction
36.5 Integration of Renewables – Fluctuating Demand and Supply
36.6 Results Interpretation
36.7 Conclusion: Making It Happen
36.8 Sources of Further Information
36.9 Acknowledgements
Product details
Product details
- Edition: 2
- Latest edition
- Published: November 9, 2022
- Language: English
About the editor
About the editor
JK
Jiří Jaromír Klemeš
Prof Dr-Hab Jiří Jaromír KLEMEŠ, DSc, Dr h c (mult) and George Pólya Professor. Head of a Centre of Excellence “Sustainable Process Integration Laboratory – SPIL”, NETME Centre, Faculty of Mechanical Engineering, Brno University of Technology - VUT Brno, Czech Republic. Previously the Project Director, Senior Project Officer and Hon Reader at Department of Process Integration at UMIST, The University of Manchester and the University of Edinburgh, UK Founder and a long-term Head of the Centre for Process Integration and Intensification – CPI2, University of Pannonia, Veszprém, Hungary. Awarded by the EC with Marie Curie Chair of Excellence (EXC). Track record of managing and coordinating 97 major EC, NATO, bilateral and UK Know-How projects. Research funding attracted over 46 M€. Co-Editor-in-Chief of Journal of Cleaner Production (IF 2020 = 9.297) and Chemical Engineering Transactions, Editor in Chief Cleaner Technologies and Engineering and Cleaner Chemical Engineering (Elsevier); Subject Editor of Energy (IF 2020 = 7.147) Managing Guest Editor of Renewable and Sustainable Energy Reviews (IF 2020 = 14.982). The founder and President of 25 y of PRES (Process Integration for Energy Saving and Pollution Reduction) conferences. Seven years Chairperson of CAPE Working Party of European Federation of Chemical Engineering, a member of WP on Process Intensification. A Member of the IChemE, UK, Sargent Medal International Committee on CAPE. Awarded by the Web of Science and Publons as a Highly Cited Researcher, Top Peer Reviewer and Top Handling Editor. He authored and co-authored 792 papers (WoS) in 106 scientific journals, h-index in Google Scholar 78, Scopus 67, PUBLONS (WoS) 61. His Publons profile (Web of Science) has 2,552 reviews for 186 scientific journals and 17,020 Editor Merits for 24 Editorial boards. Invited lecturer at 68 universities, 14 Distinguished Visiting Professor, 6 Doctor Honoris causa, 36 PhD students, 44 Expert Evaluator. Several times Distinguished Visiting Professor incl Universiti Teknologi Malaysia and University Technology Petronas, Malaysia; Xi’an Jiaotong University; the South China University of Technology, Guangzhou, Xi’an Jiaotong-Liverpool University Suzhou, JiangSu, and Tianjin University in China; University of Maribor, Slovenia; the Brno University of Technology, the Russian Mendeleev University of Chemical Technology, Moscow and Cracow University of Technology, Poland. Doctor Honoris Causa of Kharkiv National University “Kharkiv Polytechnic Institute”, Ukraine, the University of Maribor, Slovenia, University POLITEHNICA Bucharest, Romania, Széchenyi István University Györ, Hungary and “Honorary Doctor of Engineering” Universiti Teknologi Malaysia”. Awarded with “Honorary Membership of Czech Society of Chemical Engineering”, “European Federation of Chemical Engineering (EFCE) Life-Time Achievements Award” and “Pro Universitaire Pannonica” Gold Medal.