Skip to main content
Elsevier
View Cart

Books in Materials science

The Materials Science portfolio includes titles covering core knowledge and new research and applications across the field: nanotechnology and nanomaterials; polymers and plastics; textiles; composites and ceramics; electronic, magnetic, and optical materials; metals and alloys; biomaterials; surface and film science and coating technologies; materials chemistry, and more. In-depth coverage, innovative state-of-the-art approaches, and real-world application examples provide valuable, actionable insights for researchers, students, and the corporate sector. Elsevier's Materials Science portfolio places special attention on areas of current and emerging interest such as additive manufacturing / 3D printing, graphene and 2D materials, smart materials, biomimetics... The content in Elsevier's Materials Science titles program addresses core challenges facing science and society: sustainable energy technologies, the circular economy, health and human welfare.

  • Sensor Technologies for Civil Infrastructures

    Volume 2: Applications in Structural Health Monitoring
    • 2nd Edition
    • Jerome P. Lynch + 2 more
    • English
    Sensor Technologies for Civil Infrastructure, Volume 2: Applications in Structural Health Monitoring, Second Edition, provides an overview of sensor applications and a new section on future and emerging technologies. Part one is made up of case studies in assessing and monitoring specific structures such as bridges, towers, buildings, dams, tunnels, pipelines, and roads. The new edition also includes sensing solutions for assessing and monitoring of naval systems. Part two reviews emerging technologies for sensing and data analysis including diagnostic solutions for assessing and monitoring sensors, unmanned aerial systems, and UAV application in post-hazard event reconnaissance and site assessment.

  • Sensor Technologies for Civil Infrastructures

    Volume 1: Sensing Hardware and Data Collection Methods for Performance Assessment
    • 2nd Edition
    • Jerome P. Lynch + 2 more
    • English
    Sensor Technologies for Civil Infrastructure, Volume 1: Sensing Hardware and Data Collection Methods for Performance Assessment, Second Edition, provides an overview of sensor hardware and its use in data collection. The first chapters provide an introduction to sensing for structural performance assessment and health monitoring, and an overview of commonly used sensors and their data acquisition systems. Further chapters address different types of sensor including piezoelectric transducers, fiber optic sensors, acoustic emission sensors, and electromagnetic sensors, and the use of these sensors for assessing and monitoring civil infrastructures. The new edition now includes chapters on machine learning methods and reliability analysis for structural health monitoring. All chapters have been revised to include the latest advances in materials (such as piezoelectric and mechanoluminescent materials), technologies (such as LIDAR), and applications.

  • Additive Friction Stir Deposition

    • 1st Edition
    • Hang Z. Yu
    • English
    Additive Friction Stir Deposition is a comprehensive summary of the state-of-the-art understanding on this emerging solid-state additive manufacturing technology. Sections cover additive friction stir deposition, encompassing advances in processing science, metallurgical science and innovative applications. The book presents a clear description of underlying physical phenomena, shows how the process determines the printing quality, covers resultant microstructure and properties in the as-printed state, highlights its key capabilities and limitations, and explores niche applications in repair, cladding and multi-material 3D printing. Serving as an educational and research guide, this book aims to provide a holistic picture of additive friction stir deposition-based solid-state additive manufacturing as well as a thorough comparison to conventional beam-based metal additive manufacturing, such as powder bed fusion and directed energy deposition.

  • Design of Injection Molded Plastic Parts

    • 1st Edition
    • Christoph Jaroschek
    • English
    Design of Injection Molded Plastic Parts creates a new perspective on the design of plastic parts. In many books there is a strong focus on the material, the material properties, and the calculation or dimensioning. What is often not taken into account is that very many plastic components only have to withstand low loads; in very many applications, the focus is on the actual design. This requires a good understanding of the injection molds that must be built to produce the plastic components. Depending on the design of the injection molded component, these molds become more complex and more prone to failure during production. The complex process of manufacturing a plastic part becomes holistically understandable as a link is created between the molder, the mold maker, and the part designer. The focus is on injection molds and therefore on thermoplastics. Everything that is necessary for the design and manufacture of an injection molded component is presented in a simple, extremely practical manner and limited to the essentials. Many descriptive pictures as well as examples based on a demonstration component aid understanding throughout the book.

  • Nanoparticle-Based Polymer Composites

    • 1st Edition
    • Sanjay Mavinkere Rangappa + 4 more
    • English
    Nanoparticle-Based Polymer Composites discusses recent advancements on the synthesis, processing, characterization and applications of this new class of hybrid materials. Chapters cover recycling and lifecycle assessment, with contributions from leading researchers in industry, academics, the government and private research institutes from across the globe. As nanoparticle-based polymer composites are now replacing traditional polymer composites in a broad range of applications such as fuel cells, electronic and biomedical devices, this book presents the latest advancements in the field.Studies have shown that incorporating metal nanoparticles in polymer matrices can improve their mechanical, thermal, electrical and barrier properties. The unique combination of these properties makes this new class of materials suitable for a broad range of different and advanced applications.

  • Thermal Management of Gallium Nitride Electronics

    • 1st Edition
    • Marko Tadjer + 1 more
    • English
    Thermal Management of Gallium Nitride Electronics outlines the technical approaches undertaken by leaders in the community, the challenges they have faced, and the resulting advances in the field. This book serves as a one-stop reference for compound semiconductor device researchers tasked with solving this engineering challenge for future material systems based on ultra-wide bandgap semiconductors. A number of perspectives are included, such as the growth methods of nanocrystalline diamond, the materials integration of polycrystalline diamond through wafer bonding, and the new physics of thermal transport across heterogeneous interfaces. Over the past 10 years, the book's authors have performed pioneering experiments in the integration of nanocrystalline diamond capping layers into the fabrication process of compound semiconductor devices. Significant research efforts of integrating diamond and GaN have been reported by a number of groups since then, thus resulting in active thermal management options that do not necessarily lead to performance derating to avoid self-heating during radio frequency or power switching operation of these devices. Self-heating refers to the increased channel temperature caused by increased energy transfer from electrons to the lattice at high power. This book chronicles those breakthroughs.

  • Silicon Carbide Technology for Advanced Human Healthcare Applications

    • 1st Edition
    • Stephen E. Saddow
    • English
    After over two decades of focused research and development, silicon carbide (SiC) is now ready for use in the healthcare sector and Silicon Carbide Technology for Advanced Human Healthcare Applications provides an up-to-date assessment of SiC devices for long-term human use. It explores a plethora of applications that SiC is uniquely positioned for in human healthcare, beginning with the three primary areas of technology which are closest to human trials and thus adoption in the healthcare industry: neural implants and spinal cord repair, graphene and biosensors, and finally deep tissue cancer therapy using SiC nanotechnology. Biomedical-inspired engineers, scientists, and healthcare professionals will find this book to be very useful in two ways: (I) as a guide to new ways to design and develop advanced medical devices and (II) as a reference for new developments in the field. The book’s intent is to stimulate ideas for further technological enhancements and breakthroughs, which will provide alternative solutions for human healthcare applications.

  • Bamboo Fibres

    Processing, Properties and Applications
    • 1st Edition
    • K. Murugesh Babu + 1 more
    • English
    Bamboo Fibres: Processing, Properties, and Applications brings together best practices from key stages of bamboo production and application, allowing readers to find new solutions for bamboo fibers. Chapters on bamboo fiber characterization and properties show the full range of functional uses of the material. When used as a replacement for petrochemical-based synthetic fibers, this abundant and cheap material/textile can significantly reduce the environmental impact of textile products. This book is an invaluable resource for fiber chemists, material scientists, fabric technologists, manufacturers, and researchers interested in sustainable textiles. Bamboo fiber is a cellulosic fibre regenerated from the bamboo plant. It is highly sustainable being fully biodegradable and has strength comparable to conventional glass fibers. It has many other valuable characteristics, being bacteriostatic, antifungal, antibacterial, hypoallergenic, hydroscopic, a natural deodorizer, and resistant to ultraviolet light. Furthermore, it is highly durable, stable and tough and has substantial tensile strength. Due to its versatile properties, bamboo fibers are already used in the textile industry to make garments, in biomedical applications due to its antibacterial qualities, and many other areas.

  • Metal Oxides for Optoelectronics and Optics-Based Medical Applications

    • 1st Edition
    • Suresh Sagadevan + 2 more
    • English
    Metal Oxides for Optoelectronics and Optics-based Medical Applications reviews recent advances in metal oxides and their mechanisms for optoelectronic, photoluminescent and medical applications. In addition, the book examines the integration of key chemistry concepts with nanoelectronics that can improve performance in a diverse range of applications. Sections place a strong emphasis on synthesis processes that can improve the metal oxides’ physical properties and the reflected surface chemical changes that can impact their performance in various devices like light-emitting diodes, luminescence materials, solar cells, etc. Finally, the book discusses the challenges associated with the handling and maintenance of metal oxides crystalline properties. This book will be suitable for academics and those working in R&D in industry looking to learn more about cheaper and more effective methods to produce metal oxides for use in the fields of electronics, photonics, biophotonics and engineering.

  • Xenes

    2D Synthetic Materials Beyond Graphene
    • 1st Edition
    • Alessandro Molle + 1 more
    • English
    Xenes: 2D Synthetic Materials Beyond Graphene includes all the relevant information about Xenes thus far reported, focusing on emerging materials and new trends. The book's primary goal is to include full descriptions of each Xene type by leading experts in the area. Each chapter will provide key principles, theories, methods, experiments and potential applications. The book also reviews the key challenges for synthetic 2D materials such as characterization, modeling, synthesis, and integration strategies. This comprehensive book is suitable for materials scientists and engineers, physicists and chemists working in academia and R&D in industry. The discovery of silicene dates back to 2012. Since then, other Xenes were subsequently created with synthetic methods. The portfolio of Xenes includes different chemical elements of the periodic table and hence the related honeycomb-like lattices show a wealth of electronic and optical properties that can be successfully exploited for applications.

Related subjects