Journals in Physical sciences and engineering
Journals in Physical sciences and engineering
Sensors and Actuators B: Chemical
Sensors & Actuators, B: Chemical is an international journal devoted to research and development of chemical transducers. It is an interdisciplinary journal dedicated to publishing research and development in the field of chemical sensors and biosensors, chemical actuators and analytical microsystems. The journal aims to promote original works that demonstrate significant progress beyond the current state of the art in these fields along with applicability to solve meaningful analytical problems. Review articles may only be submitted upon invitation from an Editor of the journal.The journal aims to publish works that are supported by experimental results and as such purely theoretical works are not accepted. The analytical performance in all analytical parameters needs to be reported and critically compared with the state of the art. Sensing applications will be considered only if they refer to analytically challenging complex samples and are properly validated.The scope of the journal encompasses, but is not restricted to, the following areas:Novel chemical sensing and biosensing concepts, mechanisms and detection principlesDevelopmen... of chemical sensors and biosensorsFabricatio... technology of chemical sensors, biosensors, chip-based detection devices and chemical actuatorsChemical actuators including soft actuators, micro- and nanomotors, microfluidic componentsPhotonic and biophotonic sensors and chemical sensing systemsLab-on-a-chip... Micro Total Analysis Systems (µTAS) and other biochips and microarray systemsSensor and sensor-array chemometricsReports on new materials, chemical components and fabrication technologies claimed to be relevant to chemical sensing and actuation will be considered for publication only if an immediate application in that respect is presented or it presents in a novel concept or mechanism.- issn
Process Safety and Environmental Protection
Publication of the Institution of Chemical Engineers Official Journal of the European Federation of Chemical Engineering: Part BPSEP aims to be the principal international journal for publication of high quality, original papers in the branches of engineering concerned with the safety of industrial processes and the protection of the environment.Papers that deal with new developments in safety or environmental aspects, demonstrating how research results can be used in process engineering design and practice, are particularly encouraged. Experimental or theoretical research work bringing new perspectives to established principles, highlighting unsolved problems or indicating directions for future research will also be considered. The journal is especially interested in contributions that extend the boundaries of traditional engineering as well as in multidisciplinary papers.Papers related to environmental protection must take an integrated pollution control approach, demonstrating clearly that any proposed treatment method does not simply transfer pollution from one environmental medium to another, for example, from air to water or from water to solid waste. All such papers must discuss how any treatment effluents, spent adsorbents, etc., can be treated or disposed of safely, avoiding transfer of pollution to another environmental medium.For environmental protection, papers that are outside the scope are those that lack engineering aspects, including those that:use experimental techniques primarily to prepare and/or characterise various materials without considerations of process engineering design and practice;present primarily laboratory experiments of the effects of different parameters on behaviour of materials and pollutants (e.g. pH, temperature, mass of adsorbent, etc.) without further insights into the implications for engineering design and practice;focus primarily on adsorption models and curve fitting (e.g. Freundlich, Langmuir etc.); andcontain only chemical, physical and/or thermodynamic analyses.Core topic areas:Risk Assessment and Reliability EngineeringRisk assessment, risk management, consequence analysis, and uncertainty quantificationSupply chain risk managementCyber and physical security vulnerability assessmentRisk assessment of hydrogen-based technologiesHuman reliability analysis (HRA) and human-machine interface (HMI)Reliability predictions of integrated systems and high-temperature power electronicsIntegrity management and reliability, availability and maintainability (RAM)Technical Safety and Loss PreventionFire and gas detectionFirewater systemsFunctional safety and safety integrity levels (SIL)Layer of protection analysis (LOPA)Bowtie analysisEmergency responseHAZOP and other hazard/risk identification techniquesModellingM... liquid, gaseous, and two-phase releases and dispersionConsequenc... modelling, including: fire, explosion, toxic, eco-toxic effects and projectile impactsMethods, including computational fluid dynamics (CFD)Accident investigation and modellingChemical Toxicity and Exposure AssessmentToxic releases and exposure assessmentProcess plant health issues.Process Pipelines, Storage and SecurityProcess pipelines security and terrorismPipeline leak detection and measurement and corrosion assessmentCarbon capture and storage (CCS) and CO2 transportFire and ExplosionFire, combustion, and explosion phenomenaDust explosionsFire and blast protection and survivabilityHuman Factors in Design and ManagementHSE performance measurement including leading and lagging indicatorsHuman and organizational factors in safety casesHuman performance optimization by designSIMOPS (simultaneous operations)Situation... awarenessCommunicati... and risk control systemsResilience engineeringTechnical assurance and workforce trainingInherent Safety and Inherently Safer DesignHazard identificationDesign and development of new processes and equipmentMethodologi... for ranking inherent safetyRetrofitting inherently safer solutions and upgrading existing plant for improved safetyEnergy SafetyNuclear reactor protective and monitoring systemsSmall modular reactor safetyEnergy storage (e.g., metal hydride) safetyElectrochemica... system (e.g., fuel cells, batteries) safetySafety throughout the life cycle of the energy system Safety of novel energy systems (e.g., ammonia) Reaction HazardsChemical thermal stability and thermal reaction hazardsInfluence of impurities on reaction hazardsDevelopment of reactivity hazard index ranking toolsRunaway reactions, including detection and mitigationCompatibil... of chemicals involved in a chemical processIndustrial Hazards and Safety CasesMajor accident hazards ALARP and cost-benefit analysisIndustrial safety casesIncident investigations and case historiesCase histories of incidents and lessons learned integration into design and operationsTechnical analysis of incidentsComputation... modelling to simulate actual incidentsUse of incidents in training and improvement of safety performanceIncident investigation methodologiesInciden... databases and their applicationsAir pollution prevention and treatmentMethods and technologies for prevention and treatment of air pollutionAir dispersion modelling Prediction and mitigation of air pollution incidentsHealth impacts from air pollutionResource and waste managementRecovery and recycling of materials and productsEnergy from waste and alternative resourcesWaste minimisationWaste treatment technologiesWaste management: systems and processes for energy and material recovery and waste treatment; disposalLandfill and waste repository design, operation and managementLand remediation and recoveryWater pollution prevention and treatmentIndustrial, pure and ultrapure water productionMunicipal and industrial effluent treatmentPotable water treatmentSludge processing, energy recovery and disposalMitigation of water pollution incidentsWater pollution dispersion modellingHealth impacts from water pollutionFor more information on the IChemE journals published in partnership with Elsevier and to find out about some of the top research published in the journals, please see this page: https://www.elsevier...- issn
Physica E: Low-Dimensional Systems and Nanostructures
Physica E: Low-dimensional systems and Nanostructures contains papers and invited review articles on the fundamental and applied aspects of physics in low-dimensional electron systems, in semiconductor heterostructures, oxide interfaces, quantum wells and superlattices, quantum wires and dots, novel quantum states of matter such as topological insulators, and Weyl semimetals.Both theoretical and experimental contributions are invited. The journal publishes articles on spin related phenomena, optical and transport properties, many-body effects, integer and fractional quantum Hall effects, quantum spin Hall effect, single electron effects and devices, Majorana fermions, and other novel phenomena.The journal publishes topics including: topological insulators/supercond... majorana fermions, Wyel semimetals;quantum and neuromorphic computing/quantum information physics and devices based on low dimensional systems;layered superconductivity, low dimensional systems with superconducting proximity effect;2D materials such as transition metal dichalcogenides;oxid... heterostructures including ZnO, SrTiO3 etc;carbon nanostructures (graphene, carbon nanotubes, diamond NV center, etc.)quantum wells and superlattices;quantu... Hall effect, quantum spin Hall effect, quantum anomalous Hall effect;optical- and phonons-related phenomena;magnetic-s... structures;charge/sp... magnon-, skyrmion-, Cooper pair- and majorana fermion- transport and tunneling;ultra-fast nonlinear optical phenomena;novel devices and applications (such as high performance sensor, solar cell, etc);novel growth and fabrication techniques for nanostructures- issn
Chemico-Biological Interactions
A journal of molecular, cellular and biochemical toxicologyChemico-Bi... Interactions publishes research reports and review articles that examine the molecular, cellular, and/or biochemical basis of toxicologically relevant outcomes. Special emphasis is placed on toxicological mechanisms associated with interactions between chemicals and biological systems. Outcomes may include all traditional endpoints caused by synthetic or naturally occurring chemicals, both in vivo and in vitro. Endpoints of interest include, but are not limited to carcinogenesis, mutagenesis, respiratory toxicology, neurotoxicology, reproductive and developmental toxicology, and immunotoxicology.CBI discourages papers that are descriptive in nature and that do not address toxicological mechanisms (e.g., reports of toxicological effects following chemical exposure in absence of mechanistic experiments). CBI also discourages papers reporting on toxicological effects from materials, such as plant extracts or herbal medicines, that have not been chemically characterized.- issn
Journal of Analytical and Applied Pyrolysis
The Journal of Analytical and Applied Pyrolysis (JAAP) is devoted to the publication of papers dealing with innovative applications of pyrolysis processes, the characterization of products related to pyrolysis reactions, and investigations of reaction mechanism. To be considered by JAAP, a manuscript should present significant progress in these topics. The novelty must be satisfactorily argued in the cover letter. A manuscript with a cover letter to the editor not addressing the novelty is likely to be rejected without review.More specifically, the Scope of the Journal includes:Fundamental pyrolysis research on chemical substances and materials comprising: - experimental studies of pyrolysis reactions such as chemical mechanism and kinetic investigations; this includes preparative pyrolysis methods for the synthesis of novel compounds and mechanisms of high temperature reactions; - computational and theoretical studies of reaction mechanism, kinetics, and thermodynamics are acceptable, provided they are directly related to experimental data, either new or previously published, but they must be described adequately in the paper; - computational processing of pyrolysis data, such as advanced pattern recognition and principal component analysis and other multivariate analyses.Analytical pyrolysis, i.e. the characterization of a material in inert atmosphere by thermally induced degradation reactions; - exploring chemical composition and structure of materials by revealing thermal and chemical decomposition reactions leading to products fully identified by chemical and spectroscopic methods; - applications of analytical pyrolysis in environmental, biological, medical, forensic, cultural heritage, food, geochemical, polymer, and materials science; - new instrumentation and new analytical methods using pyrolysis reactions or to unravel the chemical composition of pyrolysis products.Applied pyrolysis dealing with the development of pyrolysis processes for producing valuable chemicals and/or energy carriers (gas, liquid, solid or electricity) and/or materials from fossil or renewable feedstock or waste, the recycling of materials, and the disposal of toxic substances. The manuscript must discuss the relationships between pyrolysis conditions and product characteristics. This topic includes:- various feedstock (fossil fuels, biomass, wastes, polymers, etc.) and the co-processing of different feedstock;- various thermal processes (slow and fast pyrolysis, torrefaction, carbonization, high pressure pyrolysis, catalytic pyrolysis, deoxygenation, hydropyrolysis, solvent liquefaction).The combination of a pyrolysis process with other types of treatment (mechanical, biological, or chemical) or materials characterization is within the scope of the journal only if the main focus of the manuscript is the pyrolysis process. Integrated processes combining pyrolysis reactors and products purification are welcome, if different pyrolysis conditions are studied. The computational modeling of pyrolysis reactors or processes should be related to experimental data, either new or previously published, but they must be described adequately in the paper.The pyrolysis conditions should be described thoroughly (residence times of solid and vapors, temperature distributions, etc.). The pyrolysis products must be chemically characterized. Catalysts should be physically and chemically characterized before reaction, and, when feasible analysis of catalysts after reaction is also desirable. While this may not always be possible, at least qualitative assessments should be made.The investigation of pyrolysis of a new feedstock or material with conventional methods, but without new development of the pyrolysis process is not sufficiently novel to be considered by JAAP.Review articles are invited by the Editors but may also be proposed in writing to the Review Editor. The subject of review articles should be broad enough to appeal to a wide range of readers. Discussion should be concise, but adequate. More detailed discussion may be appropriate in some cases. It is expected that reviews should be critical rather than just catalogs of published data. They should include the most important, recent advances in the topic, whereas papers of low scientific significance should be given very limited coverage.Out of the scope of JAAPThe Journal does not consider studies based on:- the activation of carbons and characterization of activated carbons;- thermal analysis, mass yields without characterization of the pyrolysis products by chemical and spectroscopic methods;- characterization and application of pyrolysis products, unless clearly related to/aimed at understanding the influence/details of pyrolysis processes and conditions;- theoretical studies, kinetic modelling etc. which are not complemented with or validated by experimental data- combustion, gasification or incineration unless specifically related to the interplay between pyrolysis and oxidation reactions.- issn
Progress in Surface Science
Progress in Surface Science publishes progress reports and review articles by authors with an established track record in the subject field of the review article. The papers are aimed at surface scientists and cover various aspects of surface science. Papers in the new section Invited Reviews, are from internationally recognized scientist that have been invited to submit a review article in a specific area. Because of the transdisciplinary nature of surface science, topics are chosen for their timeliness from across the wide spectrum of scientific and engineering subjects. The journal strives to promote the exchange of ideas between surface scientists in the various areas. Authors are encouraged to write articles that are of relevance and interest to both established surface scientists and newcomers in the field.- issn
Journal of Systems and Software
For JSS's full CfP including information on Special Issues, Industry, Trends, and Journal First tracks please continue to read for further details.The Journal of Systems and Software publishes papers covering all aspects of software engineering. All articles should provide evidence to support their claims, e.g. through empirical studies, simulation, formal proofs or other types of validation. Submissions should contribute new knowledge for software engineering research and practice, independently of specific application domains. Topics of interest include, but are not limited to: Methods and tools for software requirements, design, architecture, verification and validation, testing, maintenance and evolutionAgile, model-driven, service-oriented, open source and global software developmentHuman/soc... aspects in software engineering and developerexperienceA... Intelligence, data analytics and big data applied in software engineeringMetrics and evaluation of software development resourcesDevOps, continuous integration, build and test automationSoftware Engineering educationEthical/soc... aspects of Software EngineeringSoftware Engineering for AI systemsSoftware Engineering for SustainabilityMethod... and tools for empirical software engineering research The journal welcomes reports of practical experience for all of these topics, as well as replication studies and studies with negative results. The journal appreciates the submission of systematic literature reviews, mapping studies and meta-analyses. However, these should report interesting and important results, rather than merely providing statistics on publication year, venue etc.Open Science:JSS supports Open Science and reproducible research through the JSS Open Science Initiative. For papers where authors indicate participation, the manuscript is automatically forwarded to the JSS Open Science Board, chaired by Christoph Treude, after acceptance. Following successful review of availability and usability (which does not affect acceptance of the paper), the publisher will add a statement acknowledging validation of the Open Science material and include the paper in JSS’s Open Science collection. If material cannot be shared (e.g., due to NDAs), authors should state this explicitly. Depending on the study, Open Science material may include study protocols, (anonymized) data, analysis scripts, source code, tools, or codebooks.In addition to regular papers, JSS features two special tracks (In Practice, New Ideas and Trends Papers), as well as special issues.In Practice is exclusively focused on work that increases knowledge transfer from industry to research. It accepts: (1) Applied Research Reports where we invite submissions that report results (positive or negative) concerning the experience of applying/evaluating systems and software technologies (methods, techniques and tools) in real industrial settings. These comprise empirical studies conducted in industry (e.g., action research, case studies) or experience reports that may help understanding situations in which technologies really work and their impact. Submissions should include information on the industrial setting, provide motivation, explain the events leading to the outcomes, including the challenges faced, summarize the outcomes, and conclude with lessons learned, take-away messages, and practical advice based on the described experience. Contributing authors from industry are encouraged but not mandatory. (2) Practitioner Insights where we invite experience reports showing what actually happens in practical settings, illustrating the challenges (and pain) that practitioners face, and presenting lessons learned. Problem descriptions with significant details on the context, underlying causes and symptoms, and technical and organizational impact are also welcome. Practitioner insights papers may also comprise invited opinionated views on the evolution of chosen topic areas in practice. In contrast to applied research reports, practitioner insights are limited to four pages and the first author must be from industry. Finally, submissions to this track should be within scope of the journal's above topics of interest and they will be evaluated through industry-appropriate criteria for their merit in reporting useful industrial experience rather than in terms of academic novelty of research results.New Ideas and Trends Papers New ideas, especially those related to new research trends, emerge quickly. To accommodate timely dissemination thereof, JSS introduces the New Ideas and Trends Paper (NITP). NITPs should focus on the systems/software engineering aspects of new emerging areas, including: the internet of things, big data, cloud computing, software ecosystems, cyber-physical systems, green/sustainable systems, continuous software engineering, crowdsourcing, and the like. We distinguish two types of NITPs:A short paper that discusses a single contribution to a specific new trend or a new idea.A long paper that provides a survey of a specific trend, as well as a (possibly speculative) outline of a solution.NITPs are not required to be fully validated, but preliminary results that endorse the merit of the proposed ideas are welcomed.We anticipate revisiting specific new trends periodically, for instance through reflection or progress reports. New Ideas and Trend Papers warrant speedy publication.Special Issue proposals To submit a proposal for a special issue please submit your proposal here to Special Issues Editors Prof. Raffaela Mirandola and Prof. Laurence Duchien. Please visit the special issue guidelines page first to review the proposal guidelines and to download the proposal template required when submitting a proposal.Journal First Initiative Authors of JSS accepted papers have the opportunity to present their work in those conferences that offer a Journal First track. Using this track, researchers may take the best from two worlds: ensuring high quality in the JSS publication (thorough, multi-phase review process of a long manuscript), while getting feedback from a community of experts and fostering possible collaborations during a scientific event.Details may vary from conference to conference, but generally speaking, JSS papers to be presented in a Journal First track must report completely new research results or present novel contributions that significantly extend previous work. The ultimate decision to include a paper in the conference program is up to the conference chairs, not JSS. A JSS paper may be presented only once through a Journal First track.As of today, the list of conferences with which JSS is collaborating, or has collaborated, through a Journal First track, is: ASE, ICSME, SANER, RE, ESEM, PROFES, and APSEC.- issn
Bioorganic & Medicinal Chemistry Letters
BMCL (Bioorganic & Medicinal Chemistry Letters) publishes research communications of outstanding significance and timeliness on topics at the interface of chemistry and biology, together with concise review articles and perspectives. BMCL publishes reports of experimental results in medicinal chemistry, chemical biology and drug discovery and design, emphasizing new and emerging advances and concepts in these fields. The aim of BMCL is to promote a better understanding at the molecular level of life processes, and living organisms, as well as the interaction of these with chemical agents. BMCL continues to be a major forum for the first publication of new chemical entities prior to them entering clinical trials.BMCL welcomes papers on: the medicinal chemistry and associated biology (including target identification and validation) of established or new disease targetsThe reporting of the discovery, design or optimization of potent new compounds or biological agentsthe analysis and discussion of structure-activity relationships and pharmacological issues relevant to drug design and action using in vitro and in vivo models, including the use of computational techniques when closely linked to experimental datathe reporting of "first-in-class" new therapeutic compoundsthe chemical biology or bioorganic/bioinorga... chemistry that significantly advances knowledge of a biological mechanismmethodologi... advances that are chemistry-based and which significantly impact on medicine or biologythe preparation and examination of biotherapeutics for the treatment of pathophysiological disease statesthe development of materials for specific therapeutic targetingManuscripts on phytochemistry, theoretical molecular dynamics and exclusively computational papers are out of scope. All manuscripts will be rigorously peer-reviewed by independent experts following an initial assessment by the Editors. Please note that BMCL is not suitable for straightforward reports of incremental advances. Above all the presentation of a rational basis and a sound underlying hypothesis for the work is of particular importance, whatever its exact field.- issn
Ultramicroscopy
An international journal affiliated with MSA, ISEM, SCANDEM, NVEM, SGOEM, SIME-SM, DGE, MSC, ASEM and MSSA, committed to the advancement of new methods, tools and theories in microscopyUltramicro... is an established journal that provides a forum for the publication of original research papers, invited reviews and rapid communications. The scope of Ultramicroscopy is to describe advances in instrumentation, methods and theory related to all modes of microscopical imaging, diffraction and spectroscopy in the life and physical sciences.Electron MicroscopyInstrument... developmentImaging and scattering theoryComputational methodsImage processing and analysisAuthors are encouraged to contact the Editor in Chief directly at angus.kirkland@mater... to discuss Review proposals in the first instance possible, as these are by invitation only.- issn
International Journal of Multiphase Flow
The International Journal of Multiphase Flow publishes analytical, numerical and experimental articles of lasting interest. The scope of the journal includes all aspects of mass, momentum and energy exchange phenomena among different phases such as occur in disperse flows, gas–liquid and liquid–liquid flows, flows in porous media, boiling, granular flows and others.The journal publishes full papers, brief communications and conference announcements and Express Tracks.Express Track (ExTra) are papers that will be handled by a dedicated editor with a very short turnover time. The main goal of IJMF Express Track is to report significant developments in the field of multiphase flows that deserve to be published in a speedy manner. The first-round reviewing process is typically less than three weeks, and the average time from the submission to final online publication will be within two months. Manuscripts submitted to Express Tracks must maintain the same standard of rigor and quality required of all papers submitted to the Journal.- issn
