Journals in Physical sciences and engineering
Journals in Physical sciences and engineering
Microelectronic Engineering
Nanotechnology and Processing — Electronics, photonics, MEMS and Life Sciences Affiliated with iMNEsMicroelectronic Engineering is the premier journal focused on the fabrication and characterization of micro/nano-electroni... materials, devices and circuits (including novel electronic nanomaterials), as well as the understanding of their working mechanisms, performance, yield, variability, stability, and reliability. The journal also focuses on the techniques that make possible the fabrication and characterization of such devices and circuits, and on the materials involved in them. Occasionally, outstanding papers on simulation of materials properties, device figures-of-merit or compact modeling of circuits and systems may be accepted. The following topics are of special interest:DevicesPhot... and optoelectronic devices (including, sensors, actuators, phototransistors)Tra... (including ultra-scaled, thin film, organic, ferroelectric)Resist... switching devices (memristors, RRAM, PCRAM, FeRAM, MRAM)Magnetic and spintronic devicesMEMS and NEMS (including power, RF, magnetic, organic)Flexible electronic devices (including wearable, printed, paper)Devices for energy harvesting (piezoelectric, flexoelectric, photovoltaic, solar cells)Bioelectronic devices (molecular detection, biomimetic, diagnosis)Device-lev... simulations (including variability and reliability)Material... bandgap semiconductorsDielec... (low K and high K)Two-dimensional (2D) Materials and related transferring techniquesNanotubes, nanowires, and other nanomaterials and nanostrctures for device fabricationInterconn... metallization and barrier materialsNew Resist MaterialsSilicon on insulatorsPolymers and flexible substrates, including biocompatible materialsAtomistic simulations of materials propertiesFabricatio... and characterization processesThin films deposition techniques (CVD, ALD, evaporation, sputtering, MBE, plasma)Lithography (including optical, EUV, electron beam, nanoimpring, particle-assisted, mask less, X-ray optical methods, emerging methods and limits, as well as resists)Pattern transfer (including ion, plasma and wet transfer, as well as transfer of 2D materials)Integratio... processes (including inkjet printing, 3D printing, 3D integration)Top-down and bottom-up self-assembly processesAnnealing and its effect in the materials (including crystallization, wrinkling, de-wetting)Nanometro... (TEM, SEM, EDX, EELS, STM, AFM and related setups)Circuits and applicationsSensing and actuation, including bio-compatible applicationsSignal souring and transferLogic operations and data processingElectronic memories and information storageArtificial neural networks and neuromorphic computingCompact modeling of electronic circuitsQuantum computingFive different types of articles are considered:Research articles that report regular original research that produces significant advancement.Accelera... Publications (Letters) that feature exciting research breakthroughs.Review Articles that inform readers of the latest research and advances in a topic within the broad field of microelectronic engineering. This includes roadmaps and guides proposing the recommended methods in a specific field.Short / Technical notes intended for original limited investigations or short description of original industrial or industrially-related research and development workNews and Opinions that comment on topical issues or express views on the developments in related fields, or comment on previously published work- ISSN: 0167-9317
Computers and Geotechnics
The use of computers is firmly established in geotechnical engineering and continues to grow rapidly in both engineering practice and academe. The development of advanced numerical techniques and constitutive modeling, in conjunction with rapid developments in computer hardware, enables problems to be tackled that were unthinkable even a few years ago. Computers and Geotechnics provides an up-to-date reference for engineers and researchers engaged in computer aided analysis and research in geotechnical engineering. The journal is intended for an expeditious dissemination of advanced computer applications across a broad range of geotechnical topics. Contributions on advances in numerical algorithms, computer implementation of new constitutive models and probabilistic methods are especially encouraged. The application of newly proposed numerical methods and techniques to complex geotechnical engineering problems or to well-documented case studies are of interest. However, submissions that predominantly report results from proprietary codes, describe computer modelling of laboratory tests, field monitoring, or case histories, or develop new design approaches are only welcome if they demonstrate novel user-implemented computational methods. Mining, petroleum, or transportation engineering topics are usually discouraged as they align more closely with other journals. Since the journal is willing to accept longer papers if justified, authors are asked to avoid two-part submissions.Original contributions in the emerging areas of Machine Learning and Data Science are now welcome. Submissions should have a focus on geotechnical engineering problems and should provide either i) advances in foundational algorithms and computational frameworks or ii) innovative applications of physics-informed AI/ML techniques. Research results are sought that leverage the integration of observational data, fundamental physical laws and our domain knowledge in geomechanics and geotechnical engineering to offer new physical insights, uncover hidden intrinsic physical laws, and create new knowledge for both geotechnical researchers and practitioners.- ISSN: 0266-352X
Calphad
The design of industrial processes requires reliable thermodynamic data. CALPHAD (Computer Coupling of Phase Diagrams and Thermochemistry) aims to promote computational thermodynamics through development of models to represent thermodynamic properties for various phases which permit prediction of properties of multicomponent systems from those of binary and ternary subsystems, critical assessment of data and their incorporation into self-consistent databases, development of software to optimize and derive thermodynamic parameters and the development and use of databanks for calculations to improve understanding of various industrial and technological processes. This work is disseminated through the CALPHAD journal and its annual conference. Contributions of high quality in these and related fields, especially the fields of first-principles calculations, experimental measurements of thermochemical and phase equilibrium data, phase transformations, and the process and materials designs that the CALPHAD works are based on or used for, are welcome.Please see our Guide for Authors for information on article submission. If you require any further information or help, please visit our Support Center- ISSN: 0364-5916
Knowledge-Based Systems
Knowledge-based Systems is an international and interdisciplinary journal in the field of artificial intelligence. The journal will publish original, innovative and creative research results in the field, and is designed to focus on research in knowledge-based and other artificial intelligence techniques-based systems with the following objectives and capabilities: to support human prediction and decision-making through data science and computation techniques; to provide a balanced coverage of both theory and practical study in the field; and to encourage new development and implementation of knowledge-based intelligence models, methods, systems, and software tools, with applications in business, government, education, engineering and healthcare.This journal's current leading topics are but not limited to:Machine learning theory, methodology and algorithmsData science theory, methodologies and techniquesKnowledge presentation and engineeringRecommend... systems and E-service personalizationIntel... decision support systems, prediction systems and warning systemsComputational Intelligence systemsData-driven optimizationCognitiv... interaction and brain–computer interfaceKnowledge-b... computer vision techniquesSpecial Issue InstructionsKnowledg... Systems (KBS), an international and interdisciplinary peer-reviewed academic journal in the field of artificial intelligence, welcomes the submission of special issues on timely topics within the scope of the journal. The main objectives of the journal to organize special issues are to bring together state-of-the-art and high-quality research works, to promote key advances in the science and applications in the important field of knowledge-based systems, and to drive emerging research topics and establish flagships in the field.How to submit your Special Issue proposal:Check the selection criteria below for a KBS special issue to make sure your proposal is relevant to the journal,Write your special issue proposal in the structure given below,Submit the special issue proposal to the Editor-in-Chief (EiC),The EiC and KBS special issue assessment panel will then review your proposal and reply with their decision.Guest Editors' Duty and Special Issue Process:After a special issue proposal is accepted by the journal, a call for papers can be formally distributed. All the papers submitted to the special issue will undergo a peer review process. Guest Editors will manage the process and ensure that the reviewing standards for Knowledge-Based Systems regular issues are maintained. A Managing Guest Editor, who will be responsible for distributing submissions to the other Guest Editors, will need to be nominated. After the Guest Editors make recommendations on each paper in the special issue, the EiC will make the final decisions of acceptance for publication. After all papers to be included in the Special Issue are accepted, the Guest Editors will be responsible for either preparing an Editorial (1–2 pages in length) or writing a field survey (5–10 pages in length), which will incorporate the selected papers and related literature relevant to the topic of the special issue.Software PublicationWe invite you to convert your open source software into an additional journal publication in Software Impacts, a multi-disciplinary open access journal. Software Impacts provides a scholarly reference to software that has been used to address a research challenge. The journal disseminates impactful and re-usable scientific software through Original Software Publications which describe the application of the software to research and the published outputs.For more information contact us at: software.impacts@els...- ISSN: 0950-7051
European Journal of Mechanics - A/Solids
The European Journal of Mechanics A/Solids aims to publish high-quality articles in innovative areas of Solid Mechanics bridging fundamentals, physics, mathematics, computational sciences and materials engineering serving challenging technological applications relying on the mechanical behaviour of solids.The following topics are covered: Mechanics of materials; thermodynamics; elasticity; plasticity and damage; creep; fatigue; fracture; composites and multiphase materials; micromechanics; buckling phenomena; stability; dynamics, vibrations and waves in solids; solids for soft robotics; soft matter mechanics; metamaterial mechanics; contact mechanics, friction and wear; coupled problems; microstructural design and optimization; parameter identification for mechanics; biomechanics of soft and hard tissues; mechanics of MEMS and microsystems.- ISSN: 0997-7538
Computational Materials Science
The aim of the journal is to publish papers that advance the field of computational materials science through the application of modern computational methods alone or in conjunction with experimental techniques to discover new materials and investigate existing inorganic materials, such as metals, ceramics, composites, semiconductors, nanostructures, 2D materials, metamaterials, and organic materials, such as polymers, liquid crystals, surfactants, emulsions, and also hybrid materials combining both inorganic and organic components such as polymer nanocomposites, nanocrystal superlattices or surfactant nanoparticle mixtures.Papers that report on the development of new methods, enhancement of existing approaches or significant technical computational advances are of interest.Papers with a focus on simulations must contain new conceptual or computational advances. For example, molecular dynamics using standard force fields, ordinary techniques and reporting conventional average quantities will be rejected without review. Validation of non-first-principles methods and transferability of methods must be included as part of each submission. In-depth discussion of impact, physical properties, and motivation for the system under study is strongly recommended.Studies including experimental data are of interest, but they must address a relevant theoretical/computat... question. Papers that are deemed to be primarily experimental with some supporting theory will be returned without review.Data-driven techniques in materials research, including machine-learning enhanced simulations and materials informatics, have emerged as powerful techniques to complement traditional computational materials science. Consistent with established best practices in across data-driven science, it is important that studies proposing or applying data-driven techniques provide data and code that adhere to FAIR data principles- Findable, Accessible, Interoperable, and Reusable. FAIR data access also ensures a robust peer review process where results can be reproduced by referees. Papers that are deemed to be primarily methodological but do not provide FAIR data and code will be returned without review. In a few rare cases, some limitations may prevent the complete public sharing of code and data; for instance, when the data or code is subject to copyright or intellectual property. However, these cases should be rare and considered on a case-by-case basis. The scope of the journal includes:obtaining new or enhanced insights into material behavior, properties and phenomena,predicting structure-property relationships for new materials in conjunction with data informatics,novel capabilities of computational methods and algorithms, technical software and shareware, or cyberinfrastructures... are accepted in the form of critical reviews, articles, letters and perspectives. Occasional special issues will be organized around a particular theme and some of these will be guest edited.Not all topics that potentially fall under the category of computational materials science will be considered; to find out more please visit the Guide for Authors.Guide for Authors:Research articles will be assessed based on originality, uniqueness and scientific merit. Manuscripts with significant overlap with existing reported works are likely to be inadmissible.To be considered for publication in Computational Materials Science studies proposing or applying data-driven techniques must exhibit a high degree of novelty in application and interpretation, in addition to providing FAIR-compatible data and code to support their analysis. the data and code used to generate your models are not available. This is achievable in different ways, not limited to posting code on a publicly available GitHub repository and/or data on Zenodo, including the code and data as attachments to the manuscript, or as a docker container.Not all topics that potentially fall under the category of computational materials science will be considered. Submissions that emphasize small molecules or clusters, focus on the design of components for structural applications, describe performance of an electronic device, or characterize thermal or mass transport without extensive accompanying input and associated discussion from computational materials science methods are best suited for other specialized journals. Additionally, papers that focus on continuum mechanical responses of broad classes of materials are likely better suited for journals that specialize in the mechanics of materials. Papers on biomolecules, drugs, bone, or medical applications will not be considered. In addition, papers on materials such as asphalt, cement, concrete, and related materials will be rejected without review.- ISSN: 0927-0256
Journal of Photochemistry and Photobiology A: Chemistry
JPPA publishes the results of fundamental studies on all aspects of chemical phenomena induced by interactions between light and molecules/matter of all kinds.All systems capable of being described at the molecular or integrated multimolecular level are appropriate for the journal. This includes all molecular chemical species as well as biomolecular, supramolecular, polymer and other macromolecular systems, as well as solid state photochemistry. In addition, the journal publishes studies of semiconductor and other photoactive organic and inorganic materials, photocatalysis (organic, inorganic, supramolecular and superconductor).The scope includes condensed and gas phase photochemistry, as well as synchrotron radiation chemistry. A broad range of processes and techniques in photochemistry are covered such as light induced energy, electron and proton transfer; nonlinear photochemical behavior; mechanistic investigation of photochemical reactions and identification of the products of photochemical reactions; quantum yield determinations and measurements of rate constants for primary and secondary photochemical processes; steady-state and time-resolved emission, ultrafast spectroscopic methods, single molecule spectroscopy, time resolved X-ray diffraction, luminescence microscopy, and scattering spectroscopy applied to photochemistry. Papers in emerging and applied areas such as luminescent sensors, electroluminescence, solar energy conversion, atmospheric photochemistry, environmental remediation, and related photocatalytic chemistry are also welcome.JPPA publishes Regular Articles, Invited Feature Articles, and Short Notes. Regular Articles allow for a complete overview of research results. Specialist researchers will be occasionally invited by Editors to write Invited Feature Articles. Alternatively, proposals for Invited Feature Articles may be submitted by e-mail to one of the Editors for consideration. Invited Feature Articles are intended to present an overview of the author's recent work in relation to other published research in the field, and are not intended to be a comprehensive overview of a particular sub-discipline. Short Notes are 2-page papers with relevant new results, data or technical reports that are important to the photochemistry community.Papers that are only minor extensions of previous work or contain mainly descriptions of the synthesis of molecules or materials without a detailed photochemistry study will not be accepted for publication.Prospect... authors of review articles are kindly advised to consult the Journal of Photochemistry and Photobiology C: Photochemistry Reviews and follow manuscript preparation instructions as described athttps://www.elsevi...- ISSN: 1010-6030
Precambrian Research
Precambrian Research publishes studies on all aspects of the early stages of the composition, structure and evolution of the Earth and its planetary neighbours. With a focus on process-oriented and comparative studies, it covers, but is not restricted to, subjects such as:(1) Chemical, biological, biochemical and cosmochemical evolution; the origin of life; the evolution of the oceans and atmosphere; the early fossil record; palaeobiology; (2) Geochronology and isotope and elemental geochemistry; (3) Precambrian mineral deposits; (4) Geophysical aspects of the early Earth and Precambrian terrains; (5) Nature, formation and evolution of the Precambrian lithosphere and mantle including magmatic, depositional, metamorphic and tectonic processes.In addition, the editors particularly welcome integrated process-oriented studies that involve a combination of the above fields and comparative studies that demonstrate the effect of Precambrian evolution on Phanerozoic earth system processes.Regional and localised studies of Precambrian phenomena are considered appropriate only when the detail and quality allow illustration of a wider process, or when significant gaps in basic knowledge of a particular area can be filled.Fairness and impartiality. The professional journal of Precambrian Research expects all communications by authors, editors, and reviewers to be of a high professional standard. All communications (including manuscripts and reviews) will be written and assessed based on objective criteria, without bias, prejudice, or preferential treatment. Race, ethnicity, national origin, religion, age, gender identity, and sexual orientation are irrelevant to the review of scientific data and scientific publishing. Scientific criticism must be expressed in a constructive and collegial manor - unprofessional language (insults, degrading terminology, etc.) is unacceptable and cannot be used.This journal welcomes contributions that support and advance the UN's sustainable development goals .- ISSN: 0301-9268
Thermochimica Acta
An International Journal Concerned with All Aspects of Thermoanalytical and Calorimetric Methods and their Application to Experimental Chemistry, Physics, Biology and EngineeringThermochi... Acta publishes original research contributions covering all aspects of thermoanalytical and calorimetric methods and their application to experimental chemistry, physics, biology and engineering. The journal aims to span the whole range from fundamental research to practical application.The journal focuses on the research that advances physical and analytical science of thermal phenomena. Therefore, the manuscripts are expected to provide important insights into the thermal phenomena studied or to propose significant improvements of analytical or computational techniques employed in thermal studies. Manuscripts that report the results of routine thermal measurements are not suitable for publication in Thermochimica Acta.The journal particularly welcomes papers from newly emerging areas as well as from the traditional strength areas: - New and improved instrumentation and methods - Thermal properties and behavior of materials - Kinetics of thermally stimulated processesEach paper submitted for publication should clearly present: a) Scientific motivation (i.e., why this study is of interest); b) Relevance to the stated scope of Thermochimica Acta (i.e., why thermal methods play a crucial role in the study, or why this study is important for the use and development of thermal methods); c) General significance of the obtained results (i.e., how this study contributes to the advancement of knowledge in the general area of the study). Note that novelty of a study does not necessarily imply general significance of the results.Manuscripts reporting results of kinetic studies are expected to follow the ICTAC Kinetics Committee recommendations for collecting kinetic data (Thermochim. Acta 590 (2014) 1-23, and for performing kinetic computations (Thermochim. Acta 520 (2011) 1-19). The journal publishes regular full-length articles, short communications (either novel, unexpected theoretical or experimental results or short reports of collections of new data), and reviews (usually invited by an Editor, but proposals from authors are welcome).- ISSN: 0040-6031
Tectonophysics
The International Journal of Integrated Solid Earth SciencesThe prime focus of Tectonophysics will be high-impact original research and reviews in the fields of kinematics, structure, composition, and dynamics of the solid earth at all scales. Tectonophysics particularly encourages submission of papers based on the integration of a multitude of geophysical, geological, geochemical, geodynamic, and geotectonic methods with focus on:• Kinematics and deformation of the lithosphere based on space geodesy (e.g. GPS, InSAR), neoteoctonic studies, tectonic geomorphology, and geochronology; • Structure, composition, and thermal state of the crust and mantle and their evolution in various time scales based on geophysical and geochemical studies; • Structural geology, folding, faulting, fracturing, analysis of stress and strain, and rock mechanics; • Orogenesis, tectonism, thermochronology, surficial processes, land-climate interactions, and Lithospheric-astheno... interactions; • Active tectonics, seismology, mechanisms of earthquakes and volcanism, geological hazards and their societal impacts; • Rheology and numerical modelling of geodynamic processes; • Laboratory measurements of physical and chemical parameters of crustal and mantle rocks, and their application to geophysics and petrology; • Innovative development, including testing, of new methods in geophysics and geodynamics.Tectonop... welcomes contributions of three types:• Regular papers. • Fast track papers for short, innovative rapid communication, which will usually be reviewed within three weeks after submission. More information about this paper type can be found within the Guide for Authors. • Comprehensive invited review articles which provide an overview of significant subjects.Abstracts of maximum 300 words describing the objectives of the research, and the rationale and methods (if relevant), should be included for all article types: regular, fast-track and invited review.In addition Special Issues devoted to a single topic, and edited by an authority in that field, are also published.- ISSN: 0040-1951
