Journals in Physical sciences and engineering
Journals in Physical sciences and engineering
Energy Economics
Energy Economics is the premier field journal for energy economics and energy finance. Themes include, but are not limited to, the exploitation, conversion and use of energy, markets for energy commodities and derivatives, regulation and taxation, forecasting, environment and climate, international trade, development, and monetary policy. Contributions to the journal can use a range of methods, if appropriately and rigorously applied, including but not limited to experiments, surveys, econometrics, decomposition, simulation models, equilibrium models, optimization models, and analytical models.Submitted papers must be replicable. Submitted papers are typically pre-reviewed by the editor-in-chief and the handling editor. Papers generally need two or more positive review reports to be invited for a revise-and-resubmit.... policy Energy Economics publishes an eclectic mix of papers using a wide variety of methods to shed light on a range of topics. Our replication policy reflects this, and is applied in spirit rather than to the letter. We encourage the submission of replication studies. Replication studies should reproduce the key results of the original study, replicate them and extend them in a substantive way, while explaining the differences.For econometric papers, authors should provide program(s) and data set(s), plus a readme file on how to replicate each table, graph and other result. Ideally, there will be one command to reproduce the entire paper. Use of interactive software is discouraged. The readme file should identify the software and toolboxes used. If data are proprietary, the readme file should make clear how data can be obtained. For experimental and survey-based papers, authors should provide the original instructions (plus an English translation if applicable), information about subject eligibility and selection, the raw data, and any program used to analyze the data. For analytic papers, authors should provide data and programs used for the simulations (if any). Detailed derivations and proofs should be placed in an appendix. For papers using simulation, equilibrium or optimization models, authors should provide data and programs. If data or programs are proprietary, unambiguous information on the version should be provided, plus information on how data or programs can be obtained. Small models developed in-house should be provided. For large models developed in-house, a standard version should be provided together with a detailed description of the changes made for the version used in the paper at hand. Data and programs can be provided either as an appendix to the paper or as a stable link to a website. Data files should be in machine-readable format.- issn
Chemical Engineering Research and Design
Publication of the Institution of Chemical Engineers Official Journal of the European Federation of Chemical EngineeringChERD aims to be the principal international journal for publication of high quality, original papers in chemical engineering.Papers showing how research results can be used in chemical engineering design, and accounts of experimental or theoretical research work bringing new perspectives to established principles, highlighting unsolved problems or indicating directions for future research, are particularly welcome. Contributions that deal with new developments in plant or processes and that can be given quantitative expression are encouraged. The journal is especially interested in papers that extend the boundaries of traditional chemical engineering.The journal publishes regular special issues focusing on specific topics, and issues dedicated to selected papers from major conferences.Core topic areas:Distillation and absorption• Sustainable process design, operation and intensification• Process modelling, simulation and optimization• Process equipment characterization, design and selection• Hydrodynamics, heat and mass transfer in separation equipment• Physical properties and thermodynamic models/methodsFluid flow• Fluid flow and mixing in process equipment• Laminar to turbulent flow• Reactive flow• Multiphase flow• Flow of Non-Newtonian fluids• Flow in porous media• Interfacial flows, coating & wetting phenomena• Microfluidics• Computational fluid dynamics• Flow visualization and advanced experimental flow measurementHeat and mass transfer• Mechanisms of heat and mass transfer • Multicomponent mass transfer • Simulation of heat and mass transfer processes • Simultaneous heat and mass transferMaterials processing and product development• Fundamental properties of interest to processing of materials • Injection moulding of materials • In-line measurement and control of material processes • Morphological development processes • Pre-processing, shaping, multi-layering and finishing of final product form • Product design based on chemical engineering tools • Structure-function relationships in products and relevant systems • Tailoring chemical products and materials for end-use applicationsParticle technology• Formation and synthesis of particulates• Crystallisation and precipitation• Product formulation and rheology• Mechanics of particulate solids• Particle-fluid and particle-particle interactions• Physics-based and data-driven modelling of particle systems• Measurement and characterisation of particulate systems• Comminution, attrition, agglomeration and coating• Processing, handling and storage of particulate solids and dispersions• Mixing and separation of particulate systems• Fluidisation and multiphase flow• Dust formation and control• Design and control of systems, processes and equipment operating with particulates• Applications of particulates in processes and materialsPharmaceuti... engineering• Advanced (Bio)pharmaceutical Manufacturing: Modelling, quality-by-design, digitalization, digital twins, process analytical technologies, smart manufacturing, new unit operations, continuous manufacturing, modular and decentralized production, etc.• Design, characterisation and modelling of drug delivery systems• Formulation, modified release, etc.• Data Science for Pharmaceutical Engineering• Supply chain, personalized medicine, reaction condition prediction, solid-state form prediction, in-silico prediction of pharmacokinetics, etc.Process systems engineering• Process design and integration• Process modelling, simulation and optimization• Process dynamics, control and monitoring• Information modelling and analysis• Machine Learning in Process Design and Operations• Techno-economic analysis• Production planning/scheduling and supply chain• Domain application (bioprocesses, energy and environmental systems engineering)Reaction engineering• Catalysis engineering • Process intensification • Reaction kinetics • Reactive flows • Reactor development, modelling and scale-upSeparation processes• Adsorption Science and Technology• Molecular Separations: membranes, chromatography• Phase Separations: clarification, flocculation, coagulation, centrifugation, cyclone separation, etc.• Reactive Separations: hybrid and integrated separation techniques• Other Separations: extraction, leaching, novel separation processes, etc.• Intensification and Integration of Separation Processes: process optimization, machine learning and AI, Industry 4.0, and digitalization, etc.For more information on the IChemE journals published in partnership with Elsevier and to find out about some of the top research published in the journals, please see this page: https://www.elsevier...- issn
Soil & Tillage Research
Soil and Tillage Research is an ISTRO-affiliated journal that examines the physical, chemical and biological changes in the soil caused by tillage and field traffic. Manuscripts on all aspects of soil science, physics, technology, mechanization and applied engineering for a sustainable balance among productivity, environmental quality and profitability are considered. The following are examples of suitable topics within the scope of the journal of Soil and Tillage Research:The agricultural and biosystems engineering associated with tillage (including no-tillage, reduced-tillage and direct drilling), irrigation and drainage, crops and crop rotations, fertilization, rehabilitation of mine spoils and processes used to modify soils.Soil change effects on establishment and yield of crops, growth of plants and roots, structure and erosion of soil, cycling of carbon and nutrients, greenhouse gas emissions, leaching, runoff and other processes that affect environmental quality.Characteriza... or modeling of tillage and field traffic responses, soil, climate, or topographic effects, soil deformation processes, tillage tools, traction devices, energy requirements, economics, surface and subsurface water quality effects, tillage effects on weed, pest and disease control, and their interactions.- issn
Bioorganic & Medicinal Chemistry
The Tetrahedron Journal for Research at the Interface of Chemistry and BiologyBioorganic & Medicinal Chemistry publishes complete accounts of research of outstanding significance and timeliness on all aspects of molecular interactions at the interface of chemistry and biology, together with critical review articles. The journal publishes reports of experimental results in medicinal chemistry, chemical biology and drug discovery and design, emphasizing new and emerging advances and concepts in these fields. The aim of the journal is to promote a better understanding at the molecular level of life processes, and living organisms, as well as the interaction of these with chemical agents.The Journal welcomes papers on:the medicinal chemistry and associated biology (including target identification and validation) of established or new disease targetsthe reporting of the discovery, design or optimization of potent new compounds or biological agentsthe analysis and discussion of structure-activity relationships and pharmacological issues relevant to drug design and action using in vitro and in vivo models, including the use of computational techniques when closely linked to experimental datathe reporting of "first-in-class" new therapeutic compoundsthe chemical biology or bioorganic/bioinorga... chemistry that significantly advances knowledge of a biological mechanismmethodologi... advances that are chemistry-based and which significantly impact on medicine or biologythe preparation and examination of biotherapeutics for the treatment of pathophysiological disease statesthe development of materials for specific therapeutic targetingAll manuscripts will be rigorously peer-reviewed by independent experts following an initial assessment by the Editors. Please note that BMC is not suitable for straightforward reports of incremental advances. Above all the presentation of a rational basis and a sound underlying hypothesis for the work is of particular importance, whatever its exact field.- issn
Chemistry and Physics of Lipids
Chemistry and Physics of Lipids publishes research papers and review articles on chemical and physical aspects of lipids with primary emphasis on the relationship of these properties to biological functions and to biomedical applications.Accordi... the journal covers: advances in synthetic and analytical lipid methodology; mass-spectrometry of lipids; chemical and physical characterisation of isolated structures; thermodynamics, phase behaviour, topology and dynamics of lipid assemblies; physicochemical studies into lipid-lipid and lipid-protein interactions in lipoproteins and in natural and model membranes; movement of lipids within, across and between membranes; intracellular lipid transfer; structure-function relationships and the nature of lipid-derived second messengers; chemical, physical and functional alterations of lipids induced by free radicals; enzymatic and non-enzymatic mechanisms of lipid peroxidation in cells, tissues, biofluids; oxidative lipidomics; and the role of lipids in the regulation of membrane-dependent biological processes.Reviews, full articles and short communications will be considered for publication in each issue. Special Issues will consist of invited contributions organized and edited to cover specific themes.- issn
Infrared Physics & Technology
The Journal covers the entire field of infrared physics and technology: theory, experiment, application, devices and instrumentation. Infrared' is defined as covering the near, mid and far infrared (terahertz) regions from 0.75um (750nm) to 1mm (300GHz.) Submissions in the 300GHz to 100GHz region may be accepted at the editors discretion if their content is relevant to shorter wavelengths. The very near infrared, VNIR, defined as 750nm-1200nm is subject to special consideration.Where a submission utilises the VNIR alone, or in conjunction with longer wavelengths and uses typically `infrared? technology such as InGaAs detectors, it is in scope.Where a submission utilises the VNIR and shorter wavelengths in the visible, and uses typically visible region technology such as silicon detectors, it is unlikely to be appropriate to this Journal. Submissions must be primarily concerned with and directly relevant to this spectral region. Its core topics can be summarized as the generation, propagation and detection, of infrared radiation; the associated optics, materials and devices; and its use in all fields of science, industry, engineering and medicine. When applying infrared technology to other fields, authors should pay particular attention to emphasizing the key role of infrared.Infrared techniques occur in many different fields, notably spectroscopy and interferometry; material characterization and processing; atmospheric physics, astronomy and space research. Scientific aspects include lasers, quantum optics, quantum electronics, image processing and semiconductor physics. Some important applications are medical diagnostics and treatment, industrial inspection and environmental monitoring.A fuller though not exhaustive list of topics would include: Astronomy, Astrophysics and Space ResearchAtmospheric transmission, turbulence and scatteringBiomedical and Medical applicationsCultural heritageEnvironmenta... applications: pollution and monitoringDetectors: quantum and thermalImage processingIndustrial applicationsInfrared lasers including free electron lasersMaterial properties, processing and characterizationNon-... testing, active and passive.• Optical elements: lenses, polarizers, filters, mirrors, fibres, etc.Radiometry: techniques, calibration, standards and instrumentationRemot... sensing and range-findingSolid-s... physicsThermal imaging: device design, testing and applicationsSynchrot... radiation in the infraredAuthors may indicate opposed reviewers in the submission system if they believe there may be a conflict of interest.During submission, please suggest at least one and a maximum of five potential reviewers. You are strongly encouraged to submit recommendations for appropriately senior and knowledgeable referees having no connection to your work and not located at your institution, as this may speed up the processing of your manuscript. The editorial office may not use your suggestions, but they are greatly appreciated. Where the author works in a country with a small community of research workers in his or her field, it is highly desirable that at least two of the suggested referees are from another country.To be suitable for submission to this Journal, manuscripts should advance the field of Infrared Physics and Technology. Their target audience should be those working in the field of Infrared Physics and Technology. Papers using infrared methods, such as FTIR spectroscopy or thermography, in an essentially routine way to advance some other field, and of interest to other readerships, and generally not suited to this Journal.The Journal does include within its scope genuinely new applications of established infrared methods. In the field of medical applications such as the detection of breast cancer or diabetic pathology, submissions to IRPT should normally include advances in hardware or data collection protocols etc. Such studies are required to have adequate sized and well characterized cohorts. Clinical studies using standard equipment are generally not within the scope of the Journal. Similarly in the fields of hyperspectral imaging and near infrared (NIR) spectroscopy application of standard hardware and signal processing methods to a different agricultural product etc does not normally fall within our scope, whereas novel hardware or signal processing does. Particularly for applications in the NIR spectral range, authors should emphasize the novelty of their work.The Journal publishes experimentally validated research. Purely computational or analytical studies (e.g., computer modelling, numerical simulation, analytical calculation) are considered solely in exceptional circumstances and when supported by compelling reasons. The Journal only publishes papers which are purely based on computer modelling without support from experimental results in exceptional circumstances when there is a clear reason to do so. These might, for example, include comparative studies of designs for large pieces of equipment such as satellites, FELs etc.Papers on advances in modelling techniques, appropriately validated, are welcome.- issn
European Journal of Mechanics - B/Fluids
The European Journal of Mechanics - B/Fluids publishes papers in Eglish in all fields of fluid mechanics. Although investigations in well-established areas are within the scope of the journal, recent developments and innovative ideas are particularly welcome. Theoretical, computational and experimental papers are equally welcome. Mathematical methods, be they deterministic or stochastic, analytical or numerical, will be accepted provided they serve to clarify some identifiable problems in fluid mechanics, and provided the significance of results is explained. Similarly, experimental papers must add physical insight in to the understanding of fluid mechanics.Fast Tracks in the European Journal of Mechanics B/Fluids is a venue for short papers with significant original results across the full range of fluid mechanics. Papers submitted as Fast Tracks will receive priority handling by a dedicated editor, to ensure accelerated publication, and will appear in a dedicated EJMB/Fluids section of each journal volume. EJMB/Fluids will strive for the editorial process of two months from submission to publication. Manuscripts submitted to Fast Tracks must maintain the same standard of rigor and quality required of all papers submitted to the Journal; thus, papers in the fast-track process are not intended for the publication of minor incremental or cursory results.The European Journal of Mechanics B/Fluids welcomes extended Comments to published articles, to facilitate evaluation of each paper by the community, to stimulate scientific discussions and possibly highlight paths of future research. It is not the objective of the Comments section to point to minor issues, such as typographical errors. A Comment is meant to clarify (or contend upon) the point of a paper, to facilitate an open discussion on the contents, conclusions, and consequences of a specific article.- issn
Clinical Biomechanics
A journal affiliated to the International Society of Biomechanics, the American Society of Biomechanics, the European Society of Biomechanics, the Taiwanese Society for Biomechanics and the Société de Biomécanique.Clinica... Biomechanics is an international multidisciplinary journal of biomechanics with a focus on medical and clinical applications of new knowledge in the field.The science of biomechanics helps explain the causes of cell, tissue, organ and body system disorders, and supports clinicians in the diagnosis, prognosis and evaluation of treatment methods and technologies. Clinical Biomechanics aims to strengthen the links between laboratory and clinic by publishing cutting-edge biomechanics research which helps to explain the causes of injury and disease, and which provides evidence contributing to improved clinical management.A rigorous peer review system is employed and every attempt is made to process and publish top-quality papers promptly.Clinical Biomechanics explores all facets of body system, organ, tissue and cell biomechanics, with an emphasis on medical and clinical applications of the basic science aspects. The role of basic science is therefore recognized in a medical or clinical context. The readership of the journal closely reflects its multi-disciplinary contents, being a balance of scientists, engineers and clinicians.The contents are in the form of research papers, brief reports, review papers and correspondence, whilst special interest issues and supplements are published from time to time.Disciplines covered include biomechanics and mechanobiology at all scales, bioengineering and use of tissue engineering and biomaterials for clinical applications, biophysics, as well as biomechanical aspects of medical robotics, ergonomics, physical and occupational therapeutics and rehabilitation.The journal is affiliated to the European Society of Biomechanics, the American Society of Biomechanics, the International Society of Biomechanics, the Taiwanese Society of Biomechanics, and the Société de Biomécanique.- issn
Composites Part A: Applied Science and Manufacturing
Composites Part A: Applied Science and Manufacturing publishes original research papers, review articles, case studies, short communications and letters from a wide variety of sources dealing with all aspects of the science and technology of composite materials, including fibrous and particulate reinforcements in polymeric, metallic and ceramic matrices, and 'natural' composites. The range of applicable topics includes the properties, design and manufacture of reinforcing fibres and particles, novel architectures and concepts, multifunctional composites, advances in fabrication and processing of composite materials and structures, manufacturing science, process modelling, experimental mechanics, microstructural characterization of composites and their constituent phases, interfaces in composites, new approaches to prediction and measurement of mechanical, physical and chemical behaviour, and performance of composites in service. Articles are also welcomed on sustainable and economic aspects of composites. All articles are subject to rigorous peer review to ensure they make an important and novel contribution, and a high standard is set for both content and presentation. The Editors aim to conduct the review procedure with the minimum of delay so that prompt publication ensues.Review articles are welcome. If you want to submit a review please discuss a topic with the Editor by sending a copy of the abstract for approval before submitting a review paper.- issn
Microelectronics Reliability
Microelectronics Reliability, is dedicated to disseminating the latest research results and related information on the reliability of microelectronic devices, circuits and systems, from materials, process and manufacturing, to design, testing and operation. The coverage of the journal includes the following topics: measurement, understanding and analysis; evaluation and prediction; modelling and simulation; methodologies and mitigation. Papers which combine reliability with other important areas of microelectronics engineering, such as design, fabrication, integration, testing, and field operation will also be welcome, and practical papers reporting case studies in the field and specific application domains are particularly encouraged.Most accepted papers will be published as Research Papers, describing significant advances and completed work. Papers reviewing important developing topics of general interest may be accepted for publication as Review Papers. All contributions are subject to peer review by leading experts in the field. Special issues are devoted to significant international conferences, or to important developing topics.Microelectron... Reliability is an indispensable forum for the exchange of knowledge and experience between microelectronics reliability professionals from both academic and industrial environments, and all those associated in any way with a steadily growing microelectronics industry and its many fields of application.- issn
