Journals in Energy and power
Journals in Energy and power
Elsevier’s Energy and Power Collection offers the latest innovations in the energy transition with a focus on content that supports and advances the reduction of CO2 emissions. The collection includes content on solar, wind, geothermal, nuclear, biofuels and bioenergy, hydrogen and fuel cells, and addresses topics such as energy storage, efficiency, management, economics, and policy, among others.
Journal of Energy Storage
The Journal of Energy Storage focusses on all aspects of energy storage, in particular systems integration, electric grid integration, modelling and analysis, novel energy storage technologies, sizing and management strategies, business models for operation of storage systems and energy storage developments worldwide.The journal offers a single, peer-reviewed, multi-disciplinary platform for scientists and engineers in academia, research institutions, government agencies and industry. The journal is also of interest to decision makers and technical, economic and policy advisers in these organisations.The Journal of Energy Storage welcomes original research papers, reviews and short communications. Topics include, but are not limited to the following:• Science, technology and applications of electrochemical, chemical, mechanical, electrical and thermal energy storage • Engineering, control, optimization, numerical and modelling aspects of energy storage systems • Demand and management of intermittency in large scale low-carbon power generation involving renewable energy sources using energy storage systems and other competing flexibility options such as flexible power plants, demand side management in households and industry, combined heat and power, or grid extensions • Applications, load profiles and requirements of storage technologies in grid-scale electrical storage, electric vehicle transportation, traction applications, off-grid systems, uninterruptible power supplies, and portable electronic applications • Management and control of large quantities of distributed storage systems as virtual large scale storage systems, including vehicle-to-grid, energy storage integrated with buildings, and multi-purpose and hybrid storage systems • Testing, test procedures, evaluation, lessons learned, life cycle costs, life cycle assessment, and safety of energy storage systems • Economic, policy and regulatory aspects, markets, market models, and market introduction concepts of energy storage systems.This journal welcomes contributions that support and advance the UN's sustainable development goals, in particular SDG 7 (Affordable and clean energy)- ISSN: 2352-152X
Journal of the Energy Institute
The Journal of the Energy Institute provides peer-reviewed coverage of original high-quality research on energy, engineering and technology.The coverage is broad, and the main areas of interest include:• Combustion engineering and associated technologies; power generation; engines and propulsion; emissions and environmental pollution control; clean coal technologies; carbon abatement technologies; • Emissions and environmental pollution control; • Alternative energy sources; biomass utilisation and biomass conversion technologies; energy from waste, incineration; • Energy conversion, energy recovery; fuel cells; • Energy storage; • Clean energy technologies; pyrolysis/gasificati... future fuels; hydrogen.The journal's coverage reflects changes in energy technology that result from the transition to more efficient energy production and end use together with reduced carbon emissions.This journal welcomes contributions that support and advance the UN's sustainable development goals, in particular SDG 7 (Affordable and clean energy)- ISSN: 1743-9671
Journal of Commodity Markets
The aim of the Journal of Commodity Markets (JCM) will be to publish high-quality research in all areas of economics and finance related to commodity markets. The research may be theoretical, empirical, or policy-related. The JCM will place an emphasis on originality, quality, and clear presentation.The purpose of the journal is also to stimulate international dialog among academics, industry participants, traders, investors, and policymakers with mutual interests in commodity markets. The mandate for the journal is to present ongoing work within commodity economics and finance. Topics can be related to financialization of commodity markets; pricing, hedging, and risk analysis of commodity derivatives; risk premia in commodity markets; real option analysis for commodity project investment and production; portfolio allocation including commodities; forecasting in commodity markets; corporate finance for commodity-exposed corporations; econometric/statisti... analysis of commodity markets; organization of commodity markets; regulation of commodity markets; local and global commodity trading; and commodity supply chains. Commodity markets in this context are energy markets (including renewables), metal markets, mineral markets, agricultural markets, livestock and fish markets, markets for weather derivatives, emission markets, shipping markets, water, and related markets. This interdisciplinary and trans-disciplinary journal will cover all commodity markets and is thus relevant for a broad audience. Commodity markets are not only of academic interest but also highly relevant for many practitioners, including asset managers, industrial managers, investment bankers, risk managers, and also policymakers in governments, central banks, and supranational institutions.For queries related to the journal, please contact [email protected]- ISSN: 2405-8513
Fusion Engineering and Design
An International Journal for Fusion Energy and Technology devoted to Experiments, Theory, Methods and DesignThe journal accepts papers about experiments (both plasma and technology), theory, models, methods, and designs in areas relating to technology, engineering, and applied science aspects of magnetic and inertial fusion energy. Specific areas of interest include:MFE and IFE design studies for experiments and reactors;Fusion nuclear technologies and materials, including blankets, shields and divertorAnalysis of reactor plasmasPlasma heating, fuelling, and vacuum systemsDrivers, targets, and special technologies for IFEControls and diagnosticsFuel cycle analysis and tritium reprocessing and handlingOperations and remote maintenance of reactorsSafety, decommissioning, and waste managementEconomic and environmental analysis of components and systemsClassificatio... of Interest (New Proposal)Energy systems economic and environmental analysisExperimental device mechanical engineeringFuelling and vacuum systemsFusion applicationsFusion nuclear technologyFusion safetyFusion reactor design and analysisFusion/fissi... systemsMaterialsNeut... fusion experimentsPlasma control and diagnosticsPlasma facing componentsPlasma heating and current drive systemsRemote maintenance systemsSuperconducti... magnetsThermal hydraulics and Liquid metal MHDTritium fuel cycle- ISSN: 0920-3796
Journal of Nuclear Materials
The Journal of Nuclear Materials publishes high quality papers in materials research for nuclear applications, primarily fission reactors, fusion reactors, and similar environments including radiation areas of charged particle accelerators. Both original research and critical review papers covering experimental, theoretical, and computational aspects of either fundamental or applied nature are welcome.Papers submitted to JNM should exhibit a high degree of novelty and contain a significant discussion section that analyzes and interprets the results with outcomes that advance our understanding and push the field forward. Incremental research papers are not acceptable.The breadth of the field is such that a wide range of processes and properties in the field of materials science and engineering is of interest to the readership, spanning atom-scale processes, microstructures, thermodynamics, mechanical properties, physical properties, and corrosion, for example.Topics covered by JNM Fission reactor materials, including fuels, cladding, core structures, pressure vessels, coolant interactions with materials, moderator and control components, fission product behavior.Materials aspects of the entire fuel cycle.Materials aspects of the actinides and their compounds.Performanc... of nuclear waste materials; materials aspects of the immobilization of wastes.Fusion reactor materials, including first walls, blankets, insulators and magnets.Neutron and charged particle radiation effects in materials, including defects, transmutations, microstructures, phase changes and macroscopic properties.Interacti... of plasmas, ion beams, electron beams and electromagnetic radiation with materials relevant to nuclear systems.Topics NOT covered by JNMTopics in nuclear engineering and other areas not addressing materials, such as:Particle transport, cross-sections, shielding or isotope ratios (Radiation Physics and Chemistry; Annals of Nuclear Energy, Applied Radiation and Isotopes)Process engineering (Materials Science and Engineering A; Materials and Design)Leaching or chemical kinetics studies in aqueous, salt or other media (Hydrometallurgy; Chemical Engineering Science)Thermal hydraulics or properties of fluids (Nuclear Engineering and Design)Uranium extraction, uranium ore processing, and isotope separation processes (Nuclear Engineering and Design; Progress in Nuclear Energy)Fission or fusion reactor design and technology (Nuclear Engineering and Design; Fusion Engineering & Design)Plasma physics (Physics Letters A)Materials topics not addressing nuclear applications, such as general studies in:Physical and chemical properties including modeling and simulation (Materials Science and Engineering A; Materials Letters)Metallurgy (Journal of Alloys and Compounds; Materials Science and Engineering A)Corrosion (Corrosion Science)Welding and joining (Journal of Alloys and Compounds; Materials and Design)Ceramics (Journal of the European Ceramics Society; Ceramics international)- ISSN: 0022-3115
Energy Economics
Energy Economics is the premier field journal for energy economics and energy finance. Themes include, but are not limited to, the exploitation, conversion and use of energy, markets for energy commodities and derivatives, regulation and taxation, forecasting, environment and climate, international trade, development, and monetary policy. Contributions to the journal can use a range of methods, if appropriately and rigorously applied, including but not limited to experiments, surveys, econometrics, decomposition, simulation models, equilibrium models, optimization models, and analytical models.Submitted papers must be replicable. Submitted papers are typically pre-reviewed by the editor-in-chief and the handling editor. Papers generally need two or more positive review reports to be invited for a revise-and-resubmit.... policy Energy Economics publishes an eclectic mix of papers using a wide variety of methods to shed light on a range of topics. Our replication policy reflects this, and is applied in spirit rather than to the letter. We encourage the submission of replication studies. Replication studies should reproduce the key results of the original study, replicate them and extend them in a substantive way, while explaining the differences.For econometric papers, authors should provide program(s) and data set(s), plus a readme file on how to replicate each table, graph and other result. Ideally, there will be one command to reproduce the entire paper. Use of interactive software is discouraged. The readme file should identify the software and toolboxes used. If data are proprietary, the readme file should make clear how data can be obtained. For experimental and survey-based papers, authors should provide the original instructions (plus an English translation if applicable), information about subject eligibility and selection, the raw data, and any program used to analyze the data. For analytic papers, authors should provide data and programs used for the simulations (if any). Detailed derivations and proofs should be placed in an appendix. For papers using simulation, equilibrium or optimization models, authors should provide data and programs. If data or programs are proprietary, unambiguous information on the version should be provided, plus information on how data or programs can be obtained. Small models developed in-house should be provided. For large models developed in-house, a standard version should be provided together with a detailed description of the changes made for the version used in the paper at hand. Data and programs can be provided either as an appendix to the paper or as a stable link to a website. Data files should be in machine-readable format.- ISSN: 0140-9883
Progress in Energy and Combustion Science
An Affiliated Journal of The Combustion InstituteProgress in Energy and Combustion Science (PECS) publishes review articles on all aspects of energy and combustion science, providing a comprehensive in-depth overview, evaluation, and discussion of a particular topic. Climate change and conservation of energy requires an efficient combustion of fossil fuels and as importantly, emerging sustainable energy systems beyond combustion. The protection of the environment demands a limitation of the pollutants, including greenhouse gases, emitted from combustion and other energy-intensive systems. Combustion also plays an important role in process technology and materials science.Progress in Energy and Combustion Science contains articles by internationally recognized authors in the fields of combustion, flames, fuel science and technology, and a wide range of sustainable energy solutions. Each volume contains a number of specially commissioned review articles that provide the reader with an orderly and concise survey and scientific discussion of a particular aspect of combustion and energy. While they should not be unnecessarily long, the length of the articles allows authors to discuss their subjects more fully and comprehensively than can be undertaken in papers reporting original work. These review articles provide an opportunity for researchers to become usefully informed in fields other than their own. They are of use to students seeking a review of a particular subject, together with a comprehensive bibliography, as well as to engineers working in government and industrial research establishments, seeking practical solutions.Reviews are by invitation of the editors only. If you have a proposal for a review article, please do not submit your article directly, instead download and complete the following form (Proposal Form), which should be submitted through the journal’s Editorial Manager website. If your proposal is accepted, the Editors will invite you to submit your Review.Occasionally, PECS solicits short Perspectives to highlight recent successes, current developments, and future research needs in energy and combustion science. Perspectives are by invitation of the editors only with the aim of broadening the impact of energy and combustion research from an application point of view.- ISSN: 0360-1285
Journal of Power Sources
Journal of Power Sources serves as a premier global forum for publishing high-impact research and critical reviews that shape the future of electrochemical energy technologies. The journal distinguishes itself by providing comprehensive coverage of the entire value chain in electrochemical power sources—from fundamental materials discoveries and component innovation to full-system integration, performance validation, and real-world deployment. Our mission is to advance both scientific discoveries and application-driven technology development, bridging fundamental research with practical implementation to accelerate the transition to a clean, electrified global economy.We seek transformative research that drives progress across the following examples:• Next-generation batteries (e.g., lithium-based, sodium-based, zinc-based, and multivalent battery systems)• Metal–air batteries, redox flow batteries, supercapacitors, and hybrid energy storage–conversion devices• Fuel cells, electrolyzers, advanced electrocatalysts, and photoelectrochemical cells• Electrochemical CO₂ reduction and ammonia synthesisPriority areas include:• Materials electrochemistry to unlock step-change performance, safety, cost, efficiency, and reliability• Component engineering and scalable manufacturing for higher technology readiness• Artificial intelligence (AI)-driven design, machine learning, and multiscale simulations to accelerate discovery, enhance predictive modeling, and optimize system performance, substantiated by experimental validation• Advanced, multi-scale characterization and diagnostics, including in situ, operando, and postmortem analysis of materials and interfaces• Mechanistic studies of degradation and aging phenomena to extend device lifespan and reliability• System-level integration, prototyping, and performance validation in real-world applications• Sector-specific applications, from electric mobility and grid infrastructure to aerospace and portable devices• Circular economy solutions, including recycling, critical materials, supply chain, and lifecycle sustainability analysisSector-speci... applications are considered in scope only when they directly involve or advance the electrochemistry of materials and components.The Journal of Power Sources welcomes experimental, and experimentally validated theoretical and computational contributions, that demonstrate rigor, excellence, and impact for academia, industry, and policy.- ISSN: 0378-7753
International Journal of Hydrogen Energy
Official Journal of the International Association for Hydrogen EnergyThe International Journal of Hydrogen Energy aims to provide a central vehicle for the exchange and dissemination of new ideas, technology developments and research results in the field of Hydrogen Energy between scientists and engineers throughout the world. The emphasis is placed on original research, both analytical and experimental, covering all aspects of Hydrogen Energy, including production, storage, transmission, utilization, enabling technologies, environmental impact, economic and international aspects of hydrogen and hydrogen carriers such as NH3, CH4, alcohols, etc.The utilization includes thermochemical (combustion), photochemical, electrochemical (fuel cells) and nuclear conversion of hydrogen, hydrogen isotopes and/or hydrogen carriers to thermal, mechanical and electrical energies, and their applications in transportation (including aerospace), industrial, commercial and residential sectors.When outstanding new advances are made, or when new areas have been developed to a definitive stage, special review articles will be considered. Shorter communications are also welcome.This journal welcomes contributions that support and advance the UN's sustainable development goals, in particular SDG 7 (Affordable and clean energy)- ISSN: 0360-3199
Mechatronics
Mechatronics: The Science of Intelligent MachinesA journal of IFAC, The International Federation of Automatic Control.Mechatronics is an international refereed journal that publishes articles that report advances in the state-of-the-art in Mechatronics and Robotics. We welcome original submissions that report creative or innovative methodology and solutions with a synergistic combination of mechanical engineering, electrical and electronic engineering, control systems, data engineering and AI for intelligent machines or robotic systems. Submitted manuscripts are expected to report experimental results obtained from laboratory or full-scale mechatronic apparatus. Some of the topics addressed in the published articles include:Mechatronics... identification and control of mechatronic systems; motion and vibration control; solutions for machines towards autonomy; micro/nano systems and devices; automotive systems; biomedical mechatronic systems; and advanced manufacturing equipment and processes.Robotics:M... control, learning and system issues related to: autonomous vehicles and robots, marine, underwater, and aerial robots, legged robots, soft robots, field robots, industrial robots, medical robots; human-robot interaction; collaborative and autonomous systems; teleoperation; haptics; and multi-robot systems.- ISSN: 0957-4158
